Acid Eclipse™ DermaGlow LED & EMS Mask

Can I use LED light therapy if I have rosacea?

Yes, LED therapy can be helpful for individuals with rosacea when used correctly. The green and white light modes are particularly suited for calming the appearance of redness and reducing visible inflammation in the skin. These wavelengths help regulate overactive blood vessels and soothe the skin without causing irritation.

Which light mode should I use for rosacea symptoms?

The most beneficial light modes for rosacea are:

Green [525 nm] - Calms overactive capillaries, reduces redness, and evens out blotchy tone.

White [600 nm] - Supports skin regeneration and barrier repair, which can be beneficial for sensitive or reactive skin types.

3. Will LED therapy make rosacea worse?

When used correctly, it should not. LED therapy is non-invasive and does not generate heat, making it generally well-tolerated by rosacea-prone skin. However, those with very sensitive skin should begin with shorter sessions (5-8 minutes) and monitor their response closely. Avoid overuse and stick to lower frequencies until your skin builds tolerance.

4. How often should I use the mask for rosacea?

We recommend starting with 2-3 sessions per week on green or white light modes only. Once your skin has adjusted, you may gradually increase to 4 times per week. It’s important to space out treatments to allow your skin time to recover and respond positively.

Can I use the DermaGlow mask if I have very sensitive skin?

Yes, the DermaGlow mask can be safely used on sensitive skin, provided it’s introduced gradually. LED light therapy is non-invasive and does not rely on heat or abrasion, making it suitable for many individuals with reactive or delicate skin. We advise starting with shorter sessions (5 minutes) on the gentler light modes, such as white or green, and increasing only as tolerated.

Is LED therapy safe for eczema?

Yes, certain light wavelengths have been shown to support barrier repair and reduce inflammation associated with eczema. The white light mode (600 nm) is especially helpful - it promotes tissue regeneration and soothes irritation without triggering flare-ups. For many eczema sufferers, LED therapy offers a calming, non-chemical option to support the skin's healing process.

I’m going through TSW. Can I use this mask safely?

During Topical Steroid Withdrawal, the skin is often highly fragile, inflamed, and reactive. In our experience, some users in the later stages of TSW benefit from red/ deep infrared light (around 640 - 780 nm) to support healing, but caution is essential. If your skin is flaking, raw, or burning, it's best to avoid light therapy until things are more stable. Once the skin has settled slightly, brief sessions (3–5 minutes) of red or white light may be gently reintroduced. Always patch test first and discontinue if irritation worsens.

Should I use moisturiser or serum before using the mask on sensitive skin?

A very light moisturiser or hydrating serum is fine to use beforehand and may actually help reduce sensitivity, particularly if you’re using the EMS function. However, we advise avoiding actives like retinol*, acids, or vitamin C before use if your skin is reactive. Always patch test any product in conjunction with LED therapy first.

Note* Retinol is a great ingredient to apply after your treatment, especially if you have sensitive skin as it stimulates the production of new collagen.

Which light modes help with wrinkles and sagging skin?

The red/deep infrared light mode (640–780 nm) is the most effective for targeting wrinkles and skin laxity. These wavelengths reach the deeper layers of the skin, where they stimulate fibroblasts - the cells that produce collagen and elastin, which are responsible for maintaining skin firmness, smoothness, and structure. Over time, this can help reduce wrinkle depth, lift sagging areas, and improve overall skin density.

The yellow light mode (590 nm) can also support ageing skin by boosting circulation and cellular renewal, which helps brighten dull areas and improve skin tone - often a concern alongside wrinkles and loss of firmness. Used together on alternating days, these modes can provide a well-rounded approach to visible skin ageing.

How does EMS help with sagging skin?

EMS (electrical muscle stimulation) works by gently contracting the underlying facial muscles, particularly in the jawline, cheek, and neck areas. Over time, this improves muscle tone, contributing to a lifted and firmer appearance, especially where volume has been lost with age. When combined with LED therapy, it addresses both the structural and surface-level signs of ageing.

Am I too old to benefit from this if I’m over 50 or 60?

Absolutely not. LED and EMS technologies support natural biological processes, which continue to function into later decades - though at a slower rate. While results may take longer compared to younger users, consistent use still leads to measurable improvements in firmness, definition, and overall skin health. In fact, many users over 65 report visible softening of deep lines and increased skin health over time.

How soon can I expect results for firmness and wrinkles?

Initial improvements in skin texture and hydration may be noticeable within 2-4 weeks. However, meaningful changes in collagen and elastin levels - such as reduced wrinkles and firmer skin - typically become more visible after 6–8 weeks of consistent use, ideally 3–5 sessions per week. Long-term use is key, as collagen and elastin rebuilding is gradual.

What is EMS and how does it work?

EMS stands for Electrical Muscle Stimulation. It delivers low-level electrical currents through the skin to gently contract the underlying facial muscles, much like how your body naturally moves them. Over time, these microcontractions can help tone and lift facial contours, especially around areas like the jawline, neck, cheeks, and brow. Unlike LED light, which works on the skin’s cellular structure, EMS targets the muscle layer, helping to restore firmness and definition that naturally diminish with age.

Is EMS safe for facial use?

Yes - when used correctly and as directed, low-level EMS is considered safe for use on the face. It has been widely used in both clinical and home settings for muscle toning and rehabilitation. However, individuals with certain medical conditions, such as pacemakers, epilepsy, or active facial implants, should avoid EMS. It's also advised to start on the lowest intensity setting and increase only as your skin adjusts to the sensation.

Do I have to use the metal probes for EMS to work?

The metal rods (or microcurrent probes) are essential for EMS to deliver current to the facial muscles. However, they can be adjusted or partially removed if they feel uncomfortable — and the intensity can always be lowered. Some users prefer to use EMS in shorter sessions or gradually build up their tolerance. For those with very sensitive skin or who are new to microcurrent, it's completely fine to focus on LED therapy alone at first and introduce EMS later.

Can EMS replace professional treatments like facelifts?

While EMS cannot replicate the results of surgical procedures, regular at-home EMS use can provide a noticeable improvement in muscle tone and facial firmness, especially when paired with LED therapy. It’s particularly effective for early to moderate signs of ageing, and can also be a supportive treatment for maintaining results after professional procedures.

Does it hurt?

No, EMS does not hurt, thankfully! The electrical currents used are very low-level and typically feel like a gentle tingling or light pulsing sensation. Many users have said they don't feel them at all, or only notice some sensation in one or two areas (this is likely due to thinner skin in these areas). While some may notice the stimulation more than others, it should never feel sharp or painful. If it does, it’s advisable to reduce the intensity or adjust the positioning of the probes for comfort.

Do I need to apply anything to my skin before using the mask?

You don’t have to, but applying a light, water-based serum or gel (such as hyaluronic acid) before treatment can help improve conductivity if you're using the EMS function. For LED-only use, it's fine to apply the mask to freshly cleansed skin. Avoid oil based products beforehand, as these can block the light from penetrating the skin.

Can I use the mask on top of moisturiser or SPF?

It’s best to avoid using the mask over SPF or heavy moisturisers, as these can interfere with light penetration. For optimal results, use the mask on clean, dry skin or over a hydrating serum that absorbs well.

Should I adjust my skincare routine on the days I use the mask?

Not necessarily, but it’s wise to simplify your routine on treatment days, especially if your skin is sensitive. Avoid exfoliants (like acids or retinoids) immediately before using the mask, as the light can increase absorption and may lead to irritation. These actives can still be used after the treatment however.

What should I apply after using the mask?

After your session, your skin will be more receptive to skincare. This is a good time to apply a nourishing serum, moisturiser, or barrier-repair product. If using in the morning, follow with SPF as the final step.

How many times a week should I use the DermaGlow mask?

For most people, using the DermaGlow 3-5 times per week for 10-15 minutes per session is ideal to see visible improvements in firmness, fine lines, and skin tone over time.

If you’re new to LED therapy or have sensitive, reactive, or compromised skin, we recommend a slower introduction:

• Start with 2–3 times per week, doing just 2-6 minutes per session.
• Begin with a single light mode that suits your concern (e.g. red for ageing or green for inflammation).
• As your skin adapts and if there are no signs of overstimulation (redness, irritation, or tingling), gradually increase to the full 10–15 minutes.
• After 3-4 weeks, most people can increase their frequency up to 4–5 sessions per week as tolerated.

Taking a “less is more” approach initially helps ensure your skin responds well and builds resilience to light-based stimulation over time.

Can I use it every day for faster results?

We don’t advise daily use. The LEDs in the DermaGlow are medical-grade and powerful, and overuse can overstimulate the skin or lead to unnecessary inflammation - especially in those with sensitive or reactive skin. Instead, focus on consistency over intensity. For those addressing more advanced concerns (like significant laxity or post-procedure healing), up to 5 sessions weekly is beneficial, but rest days are still important.

Can I use multiple light modes in one session?

We recommend focusing on one light mode per session, especially when you're targeting a specific concern (such as red for collagen support or green for inflammation or rosacea). Using all, or multiple, modes together via colour cycling is available, but should be seen as a lighter alternative - not an addition to a full targeted session. Research studies, and feedback from DermaGlow users, indicates that using one light mode for an entire session, as opposed to a colour cycle, is more effective in improving specific skin concerns.

Avoid doing back-to-back treatments. Stick to one session per day max, even when alternating colours. The real progress happens between sessions, when the skin has time to rest, repair, and respond to the stimulation.

How quickly will I see results?

Results vary depending on age, skin condition, and consistency of use. Many users notice an immediate post-treatment glow and a slight tightening sensation after the first few sessions. However, meaningful changes to fine lines, texture, firmness, and tone typically begin to show after 3–4 weeks of consistent use, with more significant improvements visible after 8–12 weeks.

Will I purge or breakout?

It’s uncommon, but some users may experience mild, temporary purging in the first week or two of use - especially if they have congested skin or are using blue, green, or white light modes. This is typically short-lived and due to increased cellular turnover and detoxification. If you’re concerned, begin with shorter sessions (5–7 minutes) every other day and monitor how your skin responds.

Does the skin feel different afterwards?

Yes. Some users report a slight warmth or tingling sensation during or shortly after treatment, especially if EMS is also activated. This is normal and usually subsides within 15–30 minutes. After a session, the skin often feels smoother, firmer, and more hydrated, especially when used alongside a hydrating serum.

Is it safe to use if I have a history of skin cancer or atypical moles?

If you have a personal or family history of skin cancer, or if you have atypical or rapidly changing moles, it’s best to consult with your dermatologist before using LED therapy. While LED light therapy does not contain UV radiation and is generally considered safe, its effects on individuals with a predisposition to skin cancer have not been fully established. Caution and individual medical advice are essential in these cases.

Can I use the Dermaglow if I’m pregnant or breastfeeding?

LED light therapy is considered low-risk, but there’s limited data on its safety during pregnancy or breastfeeding. For this reason, we recommend speaking with your GP or midwife before starting treatment if you are pregnant or nursing.

Is it safe to use on broken skin, eczema, or psoriasis?

The Dermaglow should not be used over open wounds or severely broken skin. However, certain light modes - particularly white and red - may help support the healing process once the skin is intact. If you have active eczema or psoriasis, begin with caution. Use shorter sessions on a low intensity and avoid EMS until the skin is calm. Always monitor your skin’s reaction closely and discontinue use if irritation worsens.

Can I use the device if I have fillers or other cosmetic treatments?

Yes, but timing is important. Avoid using the mask for at least 10–14 days after receiving injectable treatments. EMS in particular should not be used directly over recent filler sites for 2–3 weeks. If in doubt, check with your practitioner for personalised advice.

The mask feels heavy or presses on my nose/forehead - what can I do?

The DermaGlow is made with medical-grade materials to house high-intensity LEDs and EMS components, so some users may find it slightly weighty at first. To improve comfort, we recommend adjusting the strap tension to relieve pressure on sensitive areas. Adding a thin cotton pad or soft tissue at pressure points (like the bridge of the nose or forehead) can also help distribute weight more evenly. As with any facial device, it may take a few sessions to get used to the fit.

Do I have to use the EMS (metal) rods?

No, the EMS rods are optional. They are included to stimulate facial muscles, but the LED treatment is effective on its own. If you find the EMS sensation uncomfortable, you can remove some or all of the rods or reduce the EMS intensity on your remote. Many users build up tolerance over time - starting at the lowest setting is a good approach.

The EMS feels too strong or I don’t feel it at all - is that normal?

Yes, that’s completely normal. EMS sensations can vary depending on the area of the face and the thickness of the skin. Some users feel a gentle pulsing or twitching, while others may feel very little or no sensation at all in certain areas - especially where the skin is thicker. If the sensation feels too strong, simply reduce the intensity or remove one or more rods. If you don’t feel much, or you don't feel anything, don't be concerned, so long as the rods are in contact with the skin the EMS is working. The EMS is designed to work subtly over time, so even if the sensation is minimal, the stimulation is still effective.